Vangold Resources / VAN (CVE)


  • Dear Investors;


    Please find attached Vangold Resources Ltd's (VAN-V:TSX) press
    release in regards to the Strachan Leduc Prospect (aka Deep Basin)
    located in Alberta, Canada


    BackGround Information on the Strachan Leduc
    Prospect:


    See "Discussion". Some of the reasons for the delay are noted,
    but not all of them.
    http://www.ercb.ca/docs/docume…cisions/2007/2007-004.pdf


    Permit
    Approved for Deep Basin, Aug 12, 2008
    http://www.ercb.ca/docs/Docume…cisions/2008/2008-068.pdf


    http://www.vangold.ca/s/NewsReleases.asp?ReportID=309094
    Aug
    12, 2006 Vangold Deep Basin Test Well Spuds.
    This 12% Test Well is
    referenced in Vangolds Audited Financial Statements and their Quarterlies,
    and is part of the same play.


    Attachment Gas Project PDF Dec 20,
    2004


    See Crew Energys (CR-T) presentation: Page 25 of 29.
    http://www.crewenergy.com/pdfs/crew_presentation.pdf


    Additional information on International Beryllium's (IB-V:TSX) recent
    acquisitions, and Coppermoly Limited's (COY:ASX) drill program are
    found on their respective websites. Vangold owns approximately 25.6 M
    shares in IB, and 1 M shares directly and approximately 5.2 M shares
    indirectly in Coppermoly Limited.


    http://www.internationalberyllium.com/s/Home.asp


    http://www.coppermoly.com.au/announcements/2008/index.htm


    Investor Relations ("IR") thanks all shareholders for their
    continued support during these tough market conditions. We thank
    those shareholders who have chosen to forward their updated share
    positions (retail shareholders own 48 M / 88.6M). If you have not updated
    IR, please do so by emailing myself at rmoriarty@telus.net


    Watch for further news and updates in regards
    to Vangolds' projects at any time.


    Best Regards,


    Robin Moriarty, BSc


    Investor Relations for Vangold Resources Ltd
    (VAN-V:TSX)


    Email: rmoriarty@telus.net


    Cc: Dal Brynelsen, CEO &
    President


    VANGOLD DRILLING HIGH IMPACT STRACHAN GAS WELL
    January 7, 2008 - Vangold Resources Ltd. (“Vangold”) is pleased to report that Vangold’s 15-28-37-
    8W5M Strachan Alberta Leduc Formation sour gas well; Vangold’s working interest 35% before payout,
    21% thereafter; has spud on January 6, 2009 and is currently drilling ahead. It is expected that drilling
    operations will take approximately 45 days to complete.
    The well is being drilled into the Strachan Leduc “C” Pool that has produced approximately 70 BCF of
    gas to date from three previous wells. The 15-28 well is expected to encounter attic gas in the undrilled
    updip portion of the reef. This high impact prospect is located in the liquids rich Deep Basin of the
    Alberta Foothills. This deep Foothills region of the Western Canadian Sedimentary Basin contains some
    of the most prolific multi-zone gas wells in North America, as well as some of the largest accumulations
    of oil and gas reserves. The area has long been a focus area for Exploration and Production Companies
    and continues to be today. The prospect is covered by high resolution 3D seismic and is close to gas
    processing facilities enabling a discovery to be quickly placed on production.
    To find out more about Vangold Resources Ltd. please visit our website at http://www.vangold.ca or contact
    Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.
    On Behalf of the Board of
    VANGOLD RESOURCES LTD.
    “Dal Brynelsen”
    Dal Brynelsen, President and CEO


    VANGOLD TO EARN 21% IN ALBERTA NATURAL GAS PROJECT
    December 20, 2004 - Vancouver, BC - Vangold Resources Ltd. (“Vangold”) announces that it has entered into a Farmout, Participation and Equalization Agreement with an Alberta based oil and gas company to participate in the drilling, completing and equipping of a high impact natural gas well located in the liquids rich Deep Basin of the Alberta Foothills. This deep Foothills region of the Western Canadian Sedimentary Basin contains some of the most prolific multi-zone gas wells in North America as well as some of the largest accumulations of oil and gas reserves. The area has long been a focus area for Exploration and Production Companies and continues to be today, with recent announcements highlighting discoveries of significant new gas pools. The prospect is covered by high resolution 3D seismic and is close to gas processing facilities enabling a discovery to be quickly placed on production.
    Under the terms of the agreement, Vangold a will earn 21% of the Test Well, to be drilled to an estimated total depth of 3700 meters subsurface. It is anticipated that the Test Well will spud on or before May 1, 2005 (subject to subsurface access, rig availability and all regulatory approvals).
    In addition to oil and gas investments, Vangold is one of the dominant gold exploration companies in Papua New Guinea and currently holds interests in six gold projects and one copper/gold project. Most of these properties are considered advanced stage projects with significant known gold in trench and drill hole with further drill ready targets. The properties total 1,700 sq kms in area.
    To find out more about Vangold Resources Ltd. please visit our website at http://www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.
    On Behalf of the Board of
    VANGOLD RESOURCES LTD.
    “Dal Brynelsen”
    Dal Brynelsen, President and CEO

  • Thu Jan 8, 2009
    Uganda Launches High Resolution Airborne Geophysical Data
    January 8, 2009 - Vangold Resources Ltd.
    ("Vangold") is pleased to announce the launch of the latest airborne
    geophysical data for Uganda. Eighty (80%) percent of the country is now
    covered by magnetic, radiometric and electromagnetic (EM) surveys for
    the purpose of promoting mineral exploration. Vangold's mineral
    concessions in Uganda currently cover 1.4% of Uganda's land surface
    spread over 32 exploration licenses in regions of high mineral
    potential.




    The High Resolution Airborne Geophysical Survey Programme for Uganda
    commenced in 2006. With financial support in the form of loans and
    grants from World Bank Organization (WBO), African Development Bank
    (AFDB), NDL and Government of Uganda, totalling $47 million US dollars,
    the Commissioner of the Department of Geological Survey and Mines,
    Joshua T. Tuhumwire, happily announced today, at the Ministry for
    Mineral Development and Mines in Kampala, that the seven blocks,
    totalling 630,622 line kilometres of magnetic and radiometric surveys
    are now ready and available for acquisition. He hopes the data will
    improve inadequate geoscience information and that the release of this
    extensive new high resolution geophysical data set will attract mineral
    investment in Uganda.




    Back in 1961, a regional airborne geophysical survey was conducted for
    mineral exploration and was funded by the United Nations Development
    Programme (UNDP) and the government of Uganda achieved almost 50%
    coverage by 1980. These surveys were typically flown with 1km line
    spacing, 10km ties and 120m terrain clearance. All magnetic data of the
    regional programme was subsequently compiled into one data set during
    the African Magnetic Mapping Project in 1992.




    In 1996-2000 The Ugandan government formally requested the support of
    the WBO to support and finance the implementation of the Programme. By
    2001, The Government of Uganda also approached the AFDB and by 2006 the
    Programme commenced.




    Line spacing for Blocks 1 (southeast-Bugiri and Busia), 2
    (west-central-Mubende/Fort Portal/Kamwenge), 3 (southwest-Kabala and
    Ntungamo), 5 (northwest-West Nile) and 7 (southcentral-Masaka) are 200m
    and the terrain clearance is 80m. Block 4 (Northcentral-Gulu/Kitgum)
    has 400m line spacing with 80m terrain clearance. Block 6 (central
    Uganda), never flown before and therefore considered reconnaissance
    data, was acquired with 500m line spacing and 80m terrain clearance.




    Blocks 1 through 7 are magnetic and radiometric surveys all flown by
    Fugro. In addition, several smaller EM surveys are currently being run
    and include a planned total of 23,806 line kilometres of EM surveys.
    The EM surveys are 200m line spacing and to date approximately 15,000
    has been completed.




    Block 1 (covering Vangold's Bugiri 200km2 license) and Block 6 were
    released December 13, 2007 and were purchased by Vangold at that time.
    Banded Iron formation (BIFs) of the Nyanzian Greenstone Gold Belt are
    clearly visible in Vangold's wholly owned Bugiri license trending in
    from Tanzania to the south (and host to such deposits there as
    Geita-Anglogold/Ashanti, Golden Pride-Resolute Mining and Barrick's
    Bulyanhulu).




    With the release of the new airborne high resolution geophysical data,
    Vangold plans to acquire the data relevant to their licenses, in
    particular those areas of Block 2 (Fort Portal and Kamwenge), Block 3
    (Ntungamo/Kafunjo) and Block 5 (West Nile). Vangold's exploration team
    has recently run 3 soil survey grids across their Bugiri license and is
    currently conducting soil surveys across the recently discovered
    Kibalien rocks in the West Nile licenses. The acquisition of this newly
    released geophysical data will greatly benefit the exploration work by
    helping to differentiate between lithologies, clearly visualize
    structural features and better delineate the position of magnetic and
    conductive bodies at Kafunjo.




    All technical information in this press release has been reviewed by
    Danae A. Voormeij, P.Geo., and Qualified Person as defined by National
    Instrument 43-101.




    For more information on Vangold's mineral exploration projects in Uganda, please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email Brynelsen@vangold.ca(Email address obfuscated: enable JavaScript to view)
    .




    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO

  • Ist das die Meldung für die schönen Kurssprünge? ?) Ich bin leider nicht dabei! :wall:


    Vangold besitzt 25.6 Millionen Shares von International Beryllium Corporation.


    Beryllium International Corp hat erfahren, dass das US Verteidigungsministerium und ein spezielles Pentagon Bord einen Bericht veröffentlicht haben, wonach hochreines Beryllium ein kritischer Stoff ist, dessen Angebot aus inländischen Quellen gewährleistet sein muss.


    Beryllium wird für den Bau von Sensoren, gepanzerten Fahrzeugen, Satelliten und andere Objekte gebraucht.


    International Beryllium Corporation besitzt Beryllium-Vorkommen in Colorado, Utah und die früher produzierende Boomer Mine in Colorado.


    Beryllium International Corp hat in Zusammenarbeit mit der Purdue University eine neue Art von langlebigem, effizientem und sicherem Berylliumoxid-Kernbrennstoff entwickelt.


    Der Berylliumoxid-Kernbrennstoff wurde sowohl für bestehende als auch für künftige Reaktorgenerationen designed.


    Vorhandene Arbeiten der Purdue-Nuklear-Ingenieure haben gezeigt, dass der neue UO2 - BeO Kernbrennstoff möglicherweise
    Milliarden Dollar jährlich sparen kann, da er länger und effizienter "brennen" kann als konventionelle Kernbrennstoffe. Dies wird die Nachfrage nach Beryllium und Berylliumoxid nachhaltig steigern.


    Die ganze Nachricht unter:


    http://www.vangold.ca/s/NewsReleases.asp?ReportID=337611

  • Kam eben per email:


    =======================================================================
    Re: News Release - Wednesday, February 11, 2009
    Vangold Resources Ltd Receives Update From International
    Beryllium Corporation
    =======================================================================


    February 11, 2009 - Vangold Resources Ltd. ("Vangold") reports that
    International Beryllium Corp. ("IB") issued the following press release
    and that this information is material and relevant to Vangold in view
    of its large equity in that company (Vangold currently owns 25.6
    million shares of International Beryllium Corporation).



    INTERNATIONAL BERYLLIUM SIGNS LETTER OF INTENT TO ACQUIRE
    MASTER AND SPECIALTY ALLOY MANUFACTURER AND PROCESSOR


    VANCOUVER, BC - February 10, 2009 - International Beryllium Corporation
    (TSX-V: IB) ("IBC") is pleased to announce that it has signed a letter
    of intent ("LOI") dated February 4, 2009 to acquire, through its
    subsidiary IBC US Holdings, Inc., all of the shares of a master and
    specialty alloy manufacturer and processing company (the "Target"). The
    proposed transaction is a non-arm's length transaction as Denis Brady,
    a shareholder of the Target, is also a director of IBC. The transaction
    is contemplated to be non-dilutive to existing shareholders and there
    will be no finder's fee payable. Completion of the proposed transaction
    is subject to several conditions including customary due diligence and
    approval by the boards of directors of IBC and the Target; the
    shareholders of the Target; and the TSX Venture Exchange. There
    can be no assurance that the transaction will be completed as proposed
    or at all.


    The Target is based in the United States where it manufactures and
    processes a range of master and casting alloy products, including
    beryllium copper. Its manufacturing infrastructure and processes are
    complementary to IBC's recent acquisitions of Nonferrous Products, Inc.
    and Freedom Alloys, Inc., and will further integrate IBC's
    manufacturing value chain. The Target has a lengthy history of
    producing a range of master alloys, which can be made to meet a variety
    of commercial specifications, for both North American and international
    customers.


    "We are very pleased to have signed a letter of intent to acquire this
    company," stated Anthony Dutton, President and CEO of IBC. "Its
    manufacturing capabilities will further enhance IBC's development as a
    vertically integrated global beryllium company. It will allow us to
    improve our manufacturing efficiencies and production levels in order
    to increase our market presence both in North America and
    internationally. We are focused on increasing our production levels to
    better service our customers," continued Dutton, "and we look forward
    to integrating this new opportunity with our other manufacturing
    divisions to continue growing our business as an advanced alloy
    company".


    About International Beryllium Corporation


    International Beryllium Corporation is a global exploration and
    development company focused on beryllium, beryllium oxides and
    beryllium master alloys. Beryllium and related alloys are used in a
    broad range of specialized industrial applications such as nuclear
    power, oil and gas, defense, electronics and automotive. IB, a TSX
    Venture listed company trading under the symbol TSX:IB, is 24.97% owned
    by Vangold Resources Ltd.



    To find out more about Vangold Resources Ltd. please visit our website
    at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email
    brynelsen@vangold.ca.



    On Behalf of the Board of


    VANGOLD RESOURCES LTD.


    "Dal Brynelsen"


    Dal Brynelsen, President and CEO


    The TSX Venture Exchange has not reviewed and does not accept
    responsibility for the adequacy or accuracy of the content of this news
    release.

  • Kam wieder per email:


    February 12, 2009 - Vangold Resources Ltd. ("Vangold") is pleased to
    present an update on their wholly owned Kafunjo Project, located in the
    Ntungamo District of Uganda.


    Kafunjo lies within the MesoProterozoic Kibaran Belt, a tightly folded
    metasedimentary package, which trends from Tanzania and arcs into the
    southwest of Uganda. Vangold hold three contiguous licenses in this
    region covering more than 300 square kilometers. Gravity and ground
    magnetic surveys carried out at Kafunjo in 2007-2008 verify the
    presence of a large conductive and dense body with coincident magnetic
    anomalies, buried at depth. Modeling of the data by various
    geophysicists has suggested the upper portion of the anomaly to be
    between 200m and 600m below surface. Recent aeromagnetic data flown by
    Fugro and presented by the Department of Geological Survey and Mines,
    Uganda (see Vangold's Press Release January 8, 2009), again confirms
    the presence of a 4km by 1km long magnetic anomaly within Vangold's
    licenses. Kafunjo's geophysical signature resembles very closely that
    of Kabanga in Tanzania; a world-class ultramafic-hosted nickel-PGM
    deposit located within the same Kibaran metasedimentary belt as
    Kafunjo, which is in a JV between Barrick and Xtrata, with Xtrata being
    the operator.


    In 2008, Vangold drilled 2,317m of diamond drill core in the northwest
    of the Kafunjo anomaly, aiming for the gravity high located within the
    central northwest of the 4km magnetic anomaly. Drilling depths of 700m
    to 1000m were reached. Neither ultramafic rocks nor economic
    mineralization was intersected. The anomaly remained unexplained.


    After drill site remediation and careful storage of all the drill core
    from the two drill programs (Vangold also drilled Kafunjo in 1994 and
    hit a metamorphic aureole consisting of garnets and andalusite at
    approximately 300m depth), for future relogging and reinterpretation,
    the Vangold team decided to run an MMI test line perpendicular across
    the southeast of the 4km long geophysical anomaly to see if it would
    pick up on any anomalous geochemistry.


    The Mobile Metal Ion (MMI) Process(tm) is exclusively available at
    select SGS laboratories. MMI anomalies are sharply bounded and, in most
    cases, directly overlie and define the surface projection of buried
    primary mineralized zones.


    Dr. Alan Mann, founder of the MMI technology, took a look at the
    preliminary MMI data from Kafunjo and observes the following: "The
    Kafunjo MMI geochemistry is very interesting. The presence of high Cr
    and Mg is suggestive of ultramafic lithology, Cr is low where Ni is
    high -- a possible indicator that the maximum values of nickel may be
    from a non-silicate (lithological) source. Cu [copper] is high and not
    quite coincident with Ni, suggesting if there are sulfides there may be
    some zoning. Pb [lead] shows two peaks, the same may apply [zonation]".



    "The MMI technology is really quite remarkable", says Danae A.
    Voormeij, P.Geo and VP Exploration for Vangold. "The preliminary data
    set from Kafunjo presents clear and distinct peaks in geochemistry,
    which are indicative of a layered ultramafic intrusive buried at depth,
    potentially containing economic mineralization of nickel and copper
    sulfides. This is particularly interesting, since rock outcrops at
    Kafunjo consist entirely of metasediments and metavolcanics; there are
    no outcrops of ultramafic bodies. This is probably why the MMI is
    working so well for us, as the response ratio is based on background
    readings, in this case the quartzite-rich Kibaran Belt". Based on these
    exciting results, Vangold is initiating a programme at Kafunjo to cover
    the anomalous region by means of more MMI lines, with continued sample
    spacing of 50m and line spacing of 250m. "The idea being that we should
    be getting increased levels of nickel and copper and possibly platinum
    and palladium as we approach and cover the 4km long geophysical
    anomaly. MMI lines offer profile views with discrete peaks directly
    over top of the up dip side of the buried body; multiple MMI lines will
    result in an additional clear plan view of the body, providing the
    project with direct future drill targets".


    Dal Brynelsen, President and CEO of Vangold Resources Ltd., states "We
    continue to work on Kafunjo until the anomaly is explained. The
    preliminary MMI results have breathed new life into our Kafunjo
    project".


    To find out more about Vangold Resources Ltd. please visit our website
    at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email
    brynelsen@vangold.ca.


    On Behalf of the Board of


    VANGOLD RESOURCES LTD.


    "Dal Brynelsen"


    Dal Brynelsen, President and CEO


    The TSX Venture Exchange has not reviewed and does not accept
    responsibility for the adequacy or accuracy of the content of this news
    release.

  • Eben noch eine mail!


    Die hauen ja mails raus........


    [b]VANGOLD
    RESOURCES ANNOUNCES KAFUNJO PROJECT
    [/b]


    [b]STILL
    VERY MUCH ALIVE
    [/b]


    [b]February 12, 2009 – [/b]Vangold Resources Ltd. (“Vangold”) is pleased to present an update on their wholly owned Kafunjo Project, located in the Ntungamo District of Uganda.


    Kafunjo lies within the MesoProterozoic Kibaran Belt, a tightly folded metasedimentary package, which trends from Tanzania and arcs into the southwest of Uganda. Vangold hold three contiguous licenses in this region covering more than 300 square kilometers. Gravity and ground magnetic surveys carried out at Kafunjo in 2007-2008 verify the presence of a large conductive and dense body with coincident magnetic anomalies, buried at depth. Modeling of the data by various geophysicists has suggested the upper portion of the anomaly to be between 200m and 600m below surface. Recent aeromagnetic data flown by Fugro and presented by the Department of Geological Survey and Mines, Uganda (see Vangold’s Press Release January 8, 2009), again confirms the presence of a 4km by 1km long magnetic anomaly within Vangold’s licenses. Kafunjo’s geophysical signature resembles very closely that of Kabanga in Tanzania; a world-class ultramafic-hosted
    nickel-PGM deposit located within the same Kibaran metasedimentary belt as Kafunjo, which is in a JV between Barrick and Xtrata, with Xtrata being the operator.


    In 2008, Vangold drilled 2,317m of diamond drill core in the northwest of the Kafunjo anomaly, aiming for the gravity high located within the central northwest of the 4km magnetic anomaly. Drilling depths of 700m to 1000m were reached. Neither ultramafic rocks nor economic mineralization was intersected. The anomaly remained
    unexplained.


    After drill site remediation and careful storage of all the drill core from the two drill programs (Vangold also drilled Kafunjo in 1994 and hit a metamorphic aureole
    consisting of garnets and andalusite at approximately 300m depth), for future relogging and reinterpretation, the Vangold team decided to run an MMI testline perpendicular across the southeast of the 4km long geophysical anomaly to see if it would pick up on any anomalous geochemistry.

    [b][/b]


    [b]The Mobile Metal Ion (MMI) Process™ is exclusively available at select SGS laboratories. MMI anomalies are sharply bounded and, in most cases, directly overlie and define the surface projection of buried primary mineralized zones.[/b]

    [b][/b]


    Dr. Alan Mann, founder of the MMI technology[b], took a look at the preliminary MMI data from Kafunjo and observes the following: “The Kafunjo MMI geochemistry is very interesting. The presence of high Cr and Mg is suggestive of ultramafic lithology, Cr is low where Ni is high – a possible indicator that the maximum values of nickel may be from a non-silicate (lithological) source. Cu [copper] is high and not quite coincident with Ni, suggesting if there are sulfides
    there may be some zoning. Pb [lead] shows two peaks, the same may apply [zonation]”.
    [/b]

    [b][/b]


    “The MMI technology is really quite remarkable”, says Danae A. Voormeij, P.Geo and VP Exploration for Vangold. “The preliminary data set from Kafunjo presents clear and distinct peaks in geochemistry, which are indicative of a layered ultramafic intrusive buried at depth, potentially containing economic mineralization of nickel
    and copper sulfides. This is particularly interesting, since rock outcrops at Kafunjo consist entirely of metasediments and metavolcanics; there are no outcrops of ultramafic bodies. This is probably why the MMI is working so well for us, as the response ratio is based on background readings, in this case the quartzite-rich Kibaran Belt”. Based on these exciting results, Vangold is initiating a programme at Kafunjo to cover the anomalous region by means of more MMI lines, with continued sample spacing of 50m and line spacing of 250m. “The idea being that we should be getting increased levels of nickel and copper and possibly platinum and palladium as we approach and cover the 4km long geophysical anomaly. MMI lines offer profile views with discrete peaks directly over top of the up dip side of the buried body; multiple MMI lines will result in an additional clear plan view of the body, providing the project with direct future drill targets”.


    Dal Brynelsen, President and CEO of Vangold Resources Ltd., states “We continue to work on Kafunjo until the anomaly is explained. The preliminary MMI results have breathed new life into our Kafunjo project”.


    To find out more about Vangold Resources Ltd. please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.

    On Behalf of the Board of


    [b]VANGOLD RESOURCES LTD. [/b]


    [i] “Dal Brynelsen”[/i]
    Dal Brynelsen, President
    and CEO



  • Kam heute per email


    Re: News Release - Wednesday, February 18, 2009
    Coppermoly Limited Announces Continuity Of Copper - Molybdenum
    Mineralisation
    =======================================================================


    February 18, 2009 - Vancouver, British Columbia - Vangold Resources Ltd
    ("Vangold") and its joint venture partner, New Guinea Gold Corporation
    ("NGG") are pleased to announce the continuity of coppery-molybdenum
    mineralisation demonstrated by drilling results between the Nayam and
    Misili Prospects, Simuku.


    Vangold holds directly 2,288,700 shares in Coppermoly and a further
    5,263,158 shares indirectly through its 49.7% shareholding in Pacific
    Kanon Gold Corp.


    The Simuku Project provides an excellent opportunity for participation
    in a porphyry copper system with high molybdenum credits in a
    relatively accessible and lower cost region of Papua New Guinea.


    To find out more about Vangold Resources Ltd. please visit our website
    at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email
    brynelsen@vangold.ca.


    On Behalf of the Board of


    VANGOLD RESOURCES LTD.


    "Dal Brynelsen"


    Dal Brynelsen, President and CEO


    The TSX Venture Exchange has not reviewed and does not accept
    responsibility for the adequacy or accuracy of the content of this news
    release. The statements made in this News Release may contain certain
    forward-looking statements. Actual events or results may differ from
    the Company's expectations. Certain risk factors may also affect the
    actual results achieved by the Company.


    View Coppermoly's News Release


    Associated File:
    http://www.vangold.ca/i/pdf/CoppermolyUpdateFeb182009.pdf
    621 KB in size, approx. 1 minute, 57 seconds to download at 56.6Kbps

  • Wieder ´ne Mail:


    VANGOLD RESOURCES LTD. TSX-V:VAN
    NEWS RELEASE
    NEW GUINEA EXPLORATION UPDATE
    March 3, 2009 - Vancouver, British Columbia - Vangold Resources Ltd ("Vangold”) and its joint venture
    partner, New Guinea Gold Corporation (“NGG”) are pleased to announce plans for additional exploration on
    some of its key projects:
    • At Mt Penck (NGG 50, Vangold 50%) 1500 metres of drilling is planned commencing in April, with
    results available by June. Mt Penck is an eroded strata-volcano with gold mineralization associated
    with an intrusive complex. More than 80 holes and 6000 metres have been completed.
    • Allemata, (NGG 50, Vangold 50%) up to 1000 metres of drilling is planned, beginning in April. Two
    gold prospects lie within this historic goldfield. To date, 17 holes totalling over 2000 meters plus 2
    km’s of bulldozer trenches have been completed.
    • Detailed geological summaries of Mt Penck and Allemata are being prepared for release.
    To find out more about Vangold Resources Ltd. please visit our website at http://www.vangold.ca or contact Dal
    Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.
    On Behalf of the Board of
    VANGOLD RESOURCES LTD.
    “Dal Brynelsen”
    Dal Brynelsen, President and CEO
    The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of the content of this
    news release. The statements made in this News Release may contain certain forward-looking statements. Actual events or results
    may differ from the Company’s expectations. Certain risk factors may also affect the actual results achieved by the Company.

  • Re: News Releases - Monday, April 27, 2009


    Title: Drilling Commences At Mt. Penck


    April 27, 2009 -
    Vancouver, British Columbia - Vangold Resources Ltd ("Vangold") and its joint venture partner, New Guinea Gold Corporation ("NGG") are pleased
    to announce plans for additional exploration on some of its key projects:


    The Mt. Penck property is owned, 80% by Kanon Resources Ltd., and 20% by New Guinea Gold Corporation. Thus, beneficial ownership is 40%
    Vangold Resources Ltd. and 60% by New Guinea Gold Corporation (NGG). The property consists of Exploration Licence 1322 of approximately
    102.6 sq kms and is situated 55 kms west of Kimbe, Provincial Capital of West New Britain. It has road access to Kimbe. The property encompasses a large circular feature and is part of an eroded, extinct stratovolcano.


    Gold mineralisation is widespread within the circular feature, but to date detailed work has focussed on the area shown in Figure 1. Most of the licence area is effectively unexplored.


    Kanon Resources has completed 38 diamond core holes totalling approximately 4700m. Significant results include intersections such as 72m at 1.79g/t gold, 14m at 2.82g/t gold and 2m at 36.7g/t gold.


    Several kilometres of bulldozer and hand dug trenches by Kanon yielded intersections such as 18m at 3.79g/t gold, 8m at 7.72g/t gold, 18m at 1.72g/t gold, 3m at 16.32g/t gold and 3m at 180g/t gold.


    Seven diamond core holes totalling 1093m and 1140.5m of Aircore/RC drilling were completed by previous explorers.


    To indicate the potential of the project, all drill hole intersections (present and historic) above an 0.5g/t cut off are shown in Table 1.
    Trench results are shown in Table 2. Drill hole and trench locations are shown in an Independent NI 43-101 report on Sedar or at www.newguineagold.ca.


    The present program at Mt. Penck of approximately 25 holes totalling 3000m is designed to complete the evaluation of the Kavola East mineralisation to a point that will allow a resource estimate, in accordance with the guidelines of NI 43-101, to be completed. It is also designed to test high grade gold values at Kavola South, Peni Creek and other projects. This first phase program may be ongoing, depending on assay results and corporate funding.


    Drilling will be carried out by two company-owned diamond core rigs, staffed and operated by the Company. The drills are supported by one 20t excavator and tracked vehicles for transportation. Drilling sites are all within a few kilometres of the coast.


    Previous drill hole locations and proposed drill sites are shown on Figure 2. The coloured zones represent anomalous gold in soils, any of which may represent significant gold in bedrock.


    Bob McNeil, CEO and Chairman of New Guinea Gold Corporation commented: "The Mt.Penck Project is an exciting project for both parties (NGG and
    Vangold) with excellent potential, based on drill results to date, for the ultimate definition of a significant gold resource. The project has been largely inactive for the last year as the partners prepared an IPO for parent company, Pacific Kanon Gold Corporation. This IPO is presently on hold, the partners are now directly funding the exploration and the IPO could be reactivated if market conditions are favourable.


    The project has good access and is close to infrastructure and the Provincial Capital of Kimbe. Drill assay results should become available from mid/late May and be released on a regular basis thereafter".


    To find out more about Vangold Resources Ltd. please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.


    On Behalf of the Board of


    VANGOLD RESOURCES LTD.


    "Dal Brynelsen"


    Dal Brynelsen, President and CEO


    Neither TSX Venture Excange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. The statements made in this News Release may contain certain forward-looking statements. Actual events or results may differ from the Company's expectations. Certain risk factors may also affect the actual results achieved by the Company.



    [Blockierte Grafik: http://www.vangold.ca/i/misc/Drilling-Commences-Mt-Penck-3.gif]

    TABLE 1 DRILLING RESULTS

    Kavola East prospect -- Kanon drilling results


    Nominal 0.2g/t gold cutoff


    Copyright © 2009 VANGOLD RESOURCES LTD. (VAN) All rights reserved. For more information visit our website at
    http://www.vangold.ca/
    or send email to
    info@vangold.ca
    .


    Message sent on Tue Apr 28, 2009 at 9:56:07 AM Pacific Time

  • Thu Apr 30, 2009
    Vangold Announces Appointment Of New Director Don Padgett
    April 30, 2009
    - Vancouver, British Columbia - Vangold Resources Ltd ("Vangold") is
    pleased to announce that effective May 1, 2009, Mr. Don Padgett will
    join its Board of Directors as an Independent Director.




    Mr. Padgett is an experienced merchant banker, with a particular focus
    on mining companies and has a superior track record of developing,
    financing and executing successful strategies for international
    business ventures.




    He is also a director or officer of publicly-listed issuers on the TSXV
    Exchange, including Green Park Capital Corp., Eagle I Capital Corp. and
    War Eagle Mining Company Inc. Don has also enjoyed a successful
    investment banking career in senior management positions including
    Managing Director of the investment banking group at Canaccord Capital
    Corporation's Western Canadian office (1995 to 1997) and more than 10
    years as a senior member of the Investment Banking Group at Burns Fry,
    now Nesbitt Burns (1981 to 1994). Don holds a law degree (Dalhousie
    University), an MBA (McMaster) and a BSc (University of Toronto).




    "Don's extensive experience in Mining and Capital Markets makes him an
    excellent addition to the board," said Dal Brynelsen, Vangold's
    President and CEO.



    To find out more about Vangold Resources Ltd. please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca(Email address obfuscated: enable JavaScript to view)
    .






    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO




    Neither TSX Venture Exchange nor its Regulation Services
    Provider (as that term is defined in the policies of the TSX Venture
    Venture Exchange) accepts responsibility for the adequacy or accuracy
    of this release. The statements made in this News Release may contain
    certain forward-looking statements. Actual events or results may differ
    from the Company's expectations. Certain risk factors may also affect
    the actual results achieved by the Company.



    You can view the Next News Releases item: Mon May 4, 2009, Coppermoly Limited Announces Inferred Mineral Resource For The Simuku Copper Project


    You can view the Previous News Releases item: Mon Apr 27, 2009, Drilling Commences At Mt. Penck


    You can return to the main News Releases page, or press the Back button on your browser.

  • Mon May 4, 2009
    Coppermoly Limited Announces Inferred Mineral Resource For The Simuku Copper Project
    MAY 04 , 2009 - Vancouver, British Columbia - Vangold Resources Ltd ("Vangold")
    and it's joint venture partner, New Guinea Gold Corporation ("NGG") are
    pleased to announce that Coppermoly Limited an Australian Listed
    Company has released an Inferred Mineral Resource Statement for the
    Simuku Copper Project.




    Vangold holdings include directly 2,288,700 shares in Coppermoly and a
    further 5,263,158 shares indirectly through it's 50% shareholding of
    Pacific Kanon Gold Corp.




    Coppermoly News Releases are available at http://www.coppemoly.com.au




    The Simuku Project provides an excellent opportunity for participation
    in a porphyry copper system with high molybdenum credits in a
    relatively accessible and lower cost region of Papua New Guinea.




    To find out more about Vangold Resources Ltd. please visit our website
    at http://www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email
    brynelsen@vangold.ca



    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO




    Neither TSX Venture Exchange nor its Regulation Services Provider (as
    that term is defined in the policies of the TSX Venture Venture
    Exchange) accepts responsibility for the adequacy or accuracy of this
    release. The statements made in this News Release may contain certain
    forward-looking statements. Actual events or results may differ from
    the Company's expectations. Certain risk factors may also affect the
    actual results achieved by the Company.

  • Tue May 5, 2009
    Vangold Resources Ltd Receives Update From International Beryllium Corporation
    May 5, 2009
    - Vangold Resources Ltd. ("Vangold") reports that International
    Beryllium Corp. ("IB") issued the following press release and that this
    information is material and relevant to Vangold in view of its large
    equity in that company (Vangold currently owns 25.6 million shares of
    International Beryllium Corporation).




    IBC ADVANCED ALLOYS CLOSES ACQUISITION OF SPECIALLOY COPPER ALLOYS, LLC


    IBC Advanced Alloys Corp. (TSX-V: IB) ("IBC" or the "Company") is
    pleased to announce that it has successfully closed the acquisition of
    Specialloy Copper Alloys, LLC ("Specialloy"), a specialty alloy
    manufacturer and processing company.




    IBC previously signed a letter of intent with Specialloy, which was
    announced in a news release dated February 10, 2009. The acquisition is
    a non-arm's length transaction as Denis Brady, a director of IBC, held
    a membership interest in Specialloy.




    IBC, through its wholly owned subsidiaries IBC US Holdings Inc. ("IBC
    US") and Nonferrous Products Inc. ("Nonferrous"), acquired the title in
    and membership interests of Specialloy held by Denis Brady and Billie
    D. Gray (the "Vendors"). IBC paid an aggregate cash consideration of
    US$25,000 to the Vendors in conjunction with the closing of the
    transaction. In connection with the membership interest and purchase
    sale agreement, Nonferrous signed an exchange agreement with Specialloy
    whereby Specialloy converted US$450,000 of debt owed to Nonferrous to
    membership interests. The aggregate value ascribed to Specialloy is
    therefore US$475,000. Denis Brady forgave US$99,150 owed to him by
    Specialloy and Nonferrous exchanged its debt due to it for IBC to hold
    a 100% membership interest in Specialloy.




    "IBC is pleased to have signed this membership interest purchase and
    sale agreement with Specialloy. We are looking forward to integrating
    Specialloy's production capabilities with our existing manufacturing
    divisions to develop a broader sales and production system to better
    service our customers", said Anthony Dutton, president and CEO of IBC.




    "Specialloy has the capacity to supplement our existing beryllium-based
    casting and forging business and lead to increased production of
    advanced alloy products."




    Specialloy has operated since 1952 and manufactures and processes a
    range of copper master alloy, used by foundries to produce copper alloy
    products, and copper-based alloys in billet and slab form, including
    beryllium copper alloys. Specialloy opened its existing Missouri
    facility in 1988 to more cost-efficiently produce products from larger
    furnaces, and in 1992 closed its Chicago plant. At its height of
    production, Specialloy served customers in North America, Europe and
    Asia and developed a global reputation for specialty copper alloys.




    The Specialloy plant is a manufacturing and warehouse building
    totalling 26,500 square feet, located on a six-acre site in New Madrid,
    Missouri, USA, approximately 250 kilometres south of St. Louis and
    situated on the Mississippi River. It has two furnaces and is capable
    of producing billets in a range of sizes and compositions. At its peak of operations, the company employed
    50 employees and produced 7,000,000 lbs. of alloys annually, including
    red alloys and non-beryllium alloys.




    It produced considerably less in the past two years, after
    financially-driven shutdowns and ownership changes. It currently has
    seven employees.




    This unique business has a lengthy history of producing a range of
    master alloys, the highest purity fused alloys available for making
    additions to copper, brass or bronze. Specialloy has the background to
    produce a variety of master alloys on demand, which can be made to meet
    a variety of commercial or military specifications, for both North
    American and international customers.




    IBC plans to integrate and consolidate Specialloy's operations with its
    other manufacturing operations, the Freedom Alloys division, which
    manufactures beryllium alloys in Royersford, Pennsylvania, USA, and the
    Nonferrous division, a manufacturer of forged copper, beryllium, copper
    and bronze alloys based in Franklin, Indiana, USA. IBC acquired these
    businesses in May 2008 and October 2008, respectively. Specialloy's
    manufacturing infrastructure and processes are complementary to the
    Nonferrous and Freedom divisions and will further integrate IBC's
    manufacturing value chain.




    This acquisition was approved by the TSX Venture Exchange on March 31, 2009.




    About IBC Advanced Alloys Corp.




    IBC Advanced Alloys Corp. is an integrated manufacturer and distributor
    of beryllium based alloys and related products serving a variety of
    industries including nuclear energy, automotive, telecommunications and
    a range of industrial applications. IBC has 65 employees and is
    headquartered in Vancouver, Canada with production facilities in
    Pennsylvania and Indiana. Additionally, IBC owns prospective beryllium
    properties in Brazil and the Western US covering approximately 9,500
    hectares. IBC is creating a dynamic global beryllium and advanced
    alloys company. IBC's common shares are traded on the TSX Venture
    Exchange under the symbol "IB".




    IBC Advanced Alloys Corp.


    Ian Tootill, Director of Corporate Communications


    (604) 685-6263 ext 110


    Email: adutton@ibcadvancedalloys.com


    Website: www.ibcadvancedalloys.com




    To find out more about Vangold Resources Ltd. please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.




    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO

  • Wed May 6, 2009
    Vangold Resources Ltd. Receives Update From IBC Advanced Alloys Corp.
    May 6, 2009
    -- Vangold Resources Ltd. ("Vangold") reports that International
    Beryllium Corp. ("IB") issued the following press release and that this
    information is material and relevant to Vangold in view of its large
    equity in that company (Vangold currently owns 25.6 million shares of
    International Beryllium Corporation).




    KAZATOMPROM AND IBC ADVANCED ALLOYS SIGN MEMORANDUM OF UNDERSTANDING REGARDING STRATEGIC COOPERATION





    IBC Advanced Alloys Corp. (TSX-V: IB) ("IBC") and Kazatomprom, the
    national atomic company of Kazakhstan, are pleased to announce they
    have signed a memorandum of understanding ("MOU") outlining a framework
    to develop a strategic relationship to capitalize on current and
    emerging opportunities in the global beryllium market. The MOU was
    signed after several days of meetings in Almaty, Kazakhstan between
    IBC, Kazatomprom and Ulba Metallurgical Plant ("Ulba"), the world's
    largest beryllium and master alloy processing facility and a wholly
    owned subsidiary of Kazatomprom.




    Under the terms of the MOU, Kazatomprom, Ulba and IBC have committed to
    developing a plan of strategic cooperation with regards to the global
    beryllium market and to explore mutually beneficial initiatives to
    foster market growth and technological development. In addition,
    Kazatomprom has provided IBC with beryllium and master alloy long-term
    supply assurances which will better allow IBC to develop and implement
    long term strategic growth initiatives. This MOU is an important step
    in developing a long-term strategic relationship between Kazatomprom,
    Ulba and IBC and is intended to improve manufacturing and marketing
    efficiencies while broadening the opportunities for beryllium metal,
    beryllium-based alloys and other related products.




    "We are signing this MOU with IBC," stated Mr. Moukhtar Dzhakishev,
    president of Kazatomprom, "given that IBC and its wholly owned
    subsidiary, Freedom Alloys, have a long customer history with both
    Kazatomprom and Ulba. We expect this MOU will allow us to take
    advantage of future opportunities in a mutually beneficial and
    cooperative way."




    "Kazatomprom signed this MOU for mutual cooperation," said Yuri
    Shakhvorostov, deputy director general - beryllium facility for Ulba,
    "in order to provide integrated efforts in the global beryllium market
    in the present complicated global economical environment. Our mutual
    cooperation and operational effectiveness are time proved," continued
    Deputy Director Shakhvorostov, "as Ulba and IBC Freedom Alloys Division
    have a long-established relationship in the beryllium sector and we are
    ready to continue and build on this cooperation."




    "We are tremendously excited to be strengthening our relationship with
    Kazatomprom and Ulba and to be working together to develop
    opportunities in the global beryllium and beryllium master alloys
    market," stated Anthony Dutton, president and CEO of IBC. "This MOU is
    a testament to our shared belief in the future of beryllium and
    beryllium alloys and underlines the importance of mutual cooperation to
    realize full market potential. Kazatomprom and Ulba are highly
    respected world-class companies," continued Mr. Dutton, "and IBC is
    looking forward to aligning its strategic interests and expanding its
    global reach in partnership with acknowledged market leaders."




    About IBC Advanced Alloys Corp.


    IBC Advanced Alloys Corp. is an integrated manufacturer and distributor
    of beryllium based alloys and related products serving a variety of
    industries including nuclear energy, automotive, telecommunications and
    a range of industrial applications. IBC has 65 employees and is
    headquartered in Vancouver, Canada with production facilities in
    Pennsylvania and Indiana. Additionally, IBC owns prospective beryllium
    properties in Brazil and the Western US covering approximately 9,500
    hectares. IBC is creating a dynamic global beryllium and advanced
    alloys company. IBC's common shares are traded on the TSX Venture
    Exchange under the symbol "IB". For further information please visit www.ibcadvancedalloys.com




    About Kazatomprom


    Kazatomprom is the national operator of the Republic of Kazakhstan for
    the export of uranium and its compounds, rare metals, nuclear fuel for
    nuclear power plants, special purpose equipment, technologies and
    double-use materials. The main activities of the company are:
    geological exploration, uranium production, the manufacture of nuclear
    fuel cycle products, reactor construction, nuclear power plants,
    non-ferrous metallurgy and production of construction materials, the
    electric energy sector, scientific support of production and social
    welfare and training of personnel. Today Kazatomprom has more than
    25,000 employees and is amongst the leading uranium production
    companies in the world. For further information please visit
    http://www.kazatomprom.kz




    About Ulba Metallurgical Plant


    "Ulba Metallurgical Plant" Joint-Stock Company ("UMP" JSC) is located
    in Ust-Kamenogorsk, Eastern Kazakhstan, and has been a part of
    Kazatomprom since 1997. The Ulba Plant was founded on October 29, 1949.
    By early 70s "UMP" JSC joined a number of the world's largest producers
    of uranium, beryllium and tantalum. "UMP" JSC - is a unique company
    with 60 years experience in the production and delivery of uranium,
    beryllium and tantalum products for the needs of nuclear industry,
    atomic engineering, electronics, metallurgical and other spheres. The
    Ulba plant's beryllium production facility is one of three enterprises
    in the world with full production cycle from ore concentrate processing
    to finished products output with the rated quality set-ups. Current
    company staff accounts for over 6,000 employees. For further
    information please visit http://www.ulba.kz




    To find out more about Vangold Resources Ltd. please visit our website at www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email brynelsen@vangold.ca.


    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO

  • Fri May 8, 2009
    Vangold Granted 90 Day Extension For Lake Kivu, Rwanda
    May 8, 2009
    -- Vangold Resources Ltd. ("Vangold") reports that it has signed on
    April 30, 2009 an Addendum to the Technical Evaluation Agreement
    ("TEA") to assess the petroleum potential in the Rwandan side of the
    western branch of the African rift that was originally executed on
    October 19th, 2007. Vangold will, within 90 days of the amendment,
    complete the remainder of the Airborne Gravity and Aeromagnetic Study
    by flying approximately 900 km's of survey subject to regulatory
    approval and the permitting by the Rwandan Government and the DRC, and
    availability of an airborne geophysical team. Delays in any of the
    implementation and permitting would result in appropriate extensions
    for Vangold.




    Upon completion of the exploration program described above and prior to
    seismic exploration, Dal Brynelsen, President of Vangold and Dr. Albert
    Butaure will negotiate in good faith the terms of the Production
    Sharing Agreement (PSA) between Vangold and the Minister of State in
    Charge of Energy and Water, Dr. Albert Butare.




    The remainder of the survey (900 kilometers) will be flown over the
    western portion of Vangold's 1,631- square-kilometre oil and gas
    concession, which covers the complete sedimentary basin of the Kivu
    Graben in Rwanda. The Kivu Graben is located south of the Albertine
    Graben in Uganda on Lake Albert, where Tullow Oil plc and Heritage Oil
    have made a major oil and gas discovery. Both grabens occupy the
    northern part of the western branch of the East African rift system
    (EARS).




    18 months ago, Vangold commenced exploration in Lake Kivu, Rwanda. To
    date, we have identified a basin under Lake Kivu of about approximately
    400 square kilometers based on the partially completed gravity and mag.
    survey flown in the fall of 2008 by Vangold.




    The oil potential (OOIP) of Lake Kivu cannot be estimated at this
    stage. Woodhole oceanographic (MIT Research team) analysis of sediments
    in 1973, established evidence of long chain hydrocarbon, clearly
    indicating evidence of a petroleum system under the lake.




    Lake Kivu is on a hydrocarbon fairway (western arm of the rift valley)
    that starts with 1.5 billion barrel oil field under and adjacent to
    Lake Albert approx. 300 kilometers to the north. To the south is Lake
    Tanganyika with oil seeps. Lake Kivu has equally encouraging SAR
    slicks. In addition, excellent seismic results on Lake Edward 100
    kilometers to the North will result in 3 wells being drilled there this
    year by Dominion Resources.




    While the Kivu basins may not be as large as other basins in East
    Africa, this in no way minimizes the oil potential of this Basin. The
    Albertine Basin is estimated to have generated well in excess of 100
    billion barrels of oil within its confines. Tullow and Heritage are
    estimating a 3% to 10% trapping ratio for this resource and have
    already publically stated they have found 1.5 billion recoverable
    barrels of oil and have not yet scratched the enormous potential of
    this area.




    Dal Brynelsen, President of Vangold Resources Ltd. States, "We have
    been very pleased with the Geochemical and Geophysical results that
    Vangold has developed at Lake Kivu in Rwanda.




    Many similarities occur when comparing our Lake Kivu findings with the
    discoveries in Uganda on Lake Albert. We would also like to point out
    that Lake Edward, which lies between Lake Albert and Lake Kivu, has
    currently had seismic completed and a drill program planned for Q2 and
    Q3 of 2009 by Dominion Petroleum of Australia.




    Clearly the geophysical data has outlined the presence of a significant
    basin under Lake Kivu. With the completion of the Gravity and Magnetic
    Survey expected over the next 90 days we feel we will demonstrate a
    potential for a petroleum discovery similar to the new oil fields in
    Uganda".




    To find out more about Vangold Resources Ltd. please visit our website
    at http://www.vangold.ca or contact Dal Brynelsen at 604-684-1974 or by email
    brynelsen@vangold.ca.




    On Behalf of the Board of




    VANGOLD RESOURCES LTD.




    "Dal Brynelsen"




    Dal Brynelsen, President and CEO

Schriftgröße:  A A A A A