Die Connector Zone scheint sehr interessant zu sein, da höhere Grade und das ganze recht oberflächennah - sollte sich in der PEA sehr positiv auswirken...
TROILUS DRILLS 4.33 G/T AUEQ OVER 29M, INCL. 6.37 G/T OVER 18M AT THE 87-J CONNECTOR ZONE
January 26, 2023, Montreal, Quebec – Troilus Gold Corp. (“Troilus” or the “Company”) (TSX: TLG; OTCQX: CHXMF; FRA: CM5R) reports positive assay results from the Connector Zone, a target located between the two previously mined Z87 and J4 open pits, at its gold-copper Troilus Project in northcentral, Quebec, Canada. The results herein are part of an ongoing 5,000-metre drill program designed to target and expand on shallow high-grade mineralization intersected in this zone late last year (see November 8, 2022, press release).
The latest results further demonstrate high-grade mineral continuity extending on a north, north-west trend between the two formerly mined pits (see Figures 1 and 2). Highlights are reported below, with results presented in Table 1.
Connector Zone Intercept Highlights:
Hole 87-449
- 2.07 g/t AuEq over 11.2m, including 4.07 g/t AuEq over 5m
This interval is located directly at surface; the hole collared into bedrock within this high-grade mineralized zone.
- 1.22 g/t AuEq over 10.0m, including 1.49 g/t AuEq over 6.2m
- 1.31 g/t AuEq over 6m
Hole 87-451
- 4.33 g/t AuEq over 29m, including 6.37 g/t AuEq over 18m
- 5.5 g/t AuEq over 6m
- 1.01 g/t AuEq over 49m, including 1.99 g/t AuEq over 10m
Justin Reid, CEO of Troilus Gold, commented, “The latest drill results from this new and exciting target further demonstrate the continuity of mineralized high-grade structures between the two formerly mined open pits. Detailed structural work completed by the geology team has greatly contributed to the understanding and successful targeting of these high-grade trends. These shallow high-grade zones exist within and in close proximity to the PEA pit shells and we believe they could be brought into the mine plan to positively impact the strip ratio and project economics. In the coming months our team will continue to focus on maximizing opportunities for discovery and delineation of high-grade near surface targets for inclusion in our upcoming Feasibility Study, expected in the second half of 2023.”
Structural Controls Show Mineral Continuity at the Connector Zone
The “J-87 Connector” drill hole 87-449 intercepted up-dip mineralization directly at surface of a high-grade zone in previously announced drill hole 87-422, which intersected 138m @ 1.75 g/t AuEq (see press release Nov. 8, 2022, and Figure 3 below). The hole was also pushed to depth beneath Z87, intersecting and infilling mineralization beneath the Z87 pit in the main mineralized corridor of the pit.
Drill hole 87-451 intersected a significant interval of high-grade mineralization at shallow depth along strike of interpreted structural trends travelling between the two formerly mined pits (See Figure 2 below). The mineralized interval of 4.3 g/t AuEq over 29 metres is one of the most consistently high-grade intervals drilled at Troilus, with 17 of the 29 samples within the zone returning values greater than 3.0 g/t AuEq.
These high-grade intervals exist along interpreted oblique structural trends which travel between the Z87 and J pits. In areas where these oblique trends intersect the primary NE-SW trending controls of mineralization, endowment of high grades can occur. Mineralization in the Connector Zone is oriented the same as the entire Z87 ore body, however the high-grade enrichment over strong widths is interpreted to be the result of both structural intersections and favorable stratigraphic horizons. The use of oriented core and airborne magnetics has helped to understand and support this interpretation (see Figure 2 below).